Thursday, January 12, 2012

Semi-productive

So on my first day with my son I managed to get to the plumbing store to finish getting parts for my mash turn.


The ball valve has a threaded 1/2"id connection, but I wanted to use 3/8"od hose barb.  I needed a 1/2"od to 3/8"id reducer and a 3/8"od barbed insert.  I got the parts and you can see the results above.  On the inside of the mash turn there is a kettle screen seen below.  This will act as a large particle filter and keep the drain from getting plugged by the grain when I am sparging.  I have an identical setup on my Keggle so that when I buy a hot liquor pump I can just pump the liquid from one vessel to the other.  As it stands I will let gravity do the work until I decide to buy the  ~$150 pump.

7 comments:

  1. Anonymous11:50 AM

    Well done.

    ReplyDelete
  2. Wait, so you're making it by hand using a water cooler? Outstanding.

    ReplyDelete
  3. Awesome blog! I am also building a mash tun. You should check out my blog I posted some photos of my future home brew setup a few days ago. Where did you get the valve at for it?

    ReplyDelete
  4. Interesting looks great so far!

    ReplyDelete
  5. That's really neat.

    ReplyDelete
  6. spot one mate good luck ^_^ will be following

    ReplyDelete